Friday, August 19, 2022

Finger Grips Raised In My Ball

Name: Frank                                                                            November 2008

Subject: Fingertip concern

Question: I just recently purchased a new ball (Brunswick Raging Inferno) and got fingertips for the first time after leaving a conventional grip. The problem is the inserts themselves are flush against the ball but then are raised near the top and are exposed slightly about a few millimeters. Should I be concerned about this or will they wear down, also the pro-shop driller did mention that it was because of my flexibility with my knuckles and I should not worry about the tip being exposed out of the ball?

Answer: Frank,
The grip sticking up is a minor problem. If the grip is sanded or shaved down then rubbed with Acetone (the chemical melts the grip and smooths the surface, they'll be flush with the ball. Careful Acetone is nasty stuff, and flammable).

Apparently your driller pitched the finger grip holes so the angle has a portion of the grip protruding above the ball. A bowler (You) normally doesn't roll anywhere near the gripping holes, but in the journey back from the pinsetter, the ball might roll near or over the gripping holes/inserts. That could cause a problem. Grips could lead to some cracking of the holes the grips are glued into. If the holes are sanded before the grip is inserted there is less likelihood to have an issue.

Thanks for the question. Good luck with the new grip.

Question? Contact me at revbowl@gmail.com.

How Is My Ball Drilled

Name: Jacob                                                                           November 2008

Subject: Ball layouts

Question: I was wondering if there was a website that would tell me how my ball is drilled, and what all of those drilling terms mean (Pin Up, MB in strong, Pin above bridge, MB on VAL, etc.).  I wanted to know so I could review my balls on different websites.

Answer: Jacob,
No website to accomplish exactly what you need. But some manufacturer's sites provide a fair amount of information. Check out the Storm Bowling website for their Glossary of terms at: (http://www.stormbowling.com/company/glossary.asp) or Ebonite International for theirs: http://ebonite.com/resources/technical_terms/

How about talking to the person that drilled your bowling balls?

I wish I had a better feel about some of the Internet chat rooms, but the misinformation in the reviews and forums is scary. Obviously, there are credible people on occasionally, the manufacturers have some staff assigned to post and moderate any information about their brands, but generally, I've found way to little credible info shared actively by bowlers craving knowledge.

Better to seek out individual manufacturer sites some have FAQ sections, some just provide a wealth of information about players, products and the company culture. Or IBPSIA.com (the International Bowling Pro Shop and Instructors Association) website.

I commend you for finding AllExperts, it is a pleasure helping bowlers that crave the info you do. (Unfortunately AllExperts.com is no longer an active site.) Which is why I'm transferring some of my Questions to my blog. But consider asking the person drilling your equipment, they are invested in you doing well (or should be, you pay him/her). 

Some guys aren't very talkative, or are secretive about their expertise (or lack of it). But you want to improve, don't be afraid to ask for and maybe even pay for their time. FREE Info is often worth what you pay for it. (Unfortunately, on here anyway, that includes me!)

Because of the Avalanche of misinformation available on the Net, some info provides a Grand Illusion, I have chosen to write for AllExperts, my store website (www.revbowl.com), my blog (The Bowling Tree). Also I contributed to Pro Shop Operator magazine (a trade publication) and occasionally in Bowlers Journal International magazine (when they ask). Misinformed bowlers become frustrated bowlers and when their desire to improve is Bashed, they quit the sport.

Our industry is made up of people that love and want the sport to prosper, and others that treat it like the oceans (keep dumping crap into it). But, tens of millions have given up the game in the last two decades, and hopefully the people coming into the sport can find resources for accurate information, effective instruction and educated ball drilling and equipment preparation.

That creak was me stepping down off my soap box. Sorry for the rave. Good luck, bowl well, and thanks for the questions.

Questions? Contact me at revbowl@gmail.com

Knock More Pins Down

Name: Bill

Subject: Knocking More Pins Down

Question: I'm 77 years old..love bowling...recently I developed arthritis in my knuckles near the end of my fingers..I went down to an 11 lb ball..that helped...I tried a plain urethane ball..wouldn't carry well..the lanes around here are pretty dry...if I have to move too far left..rolls out at the end..I tried a Brunswick Groove dry..no carry..someone suggested go to a slightly shorter finger tip grip..and try a better quality ball for dry lanes...like a Brunswick Avalanche pearl..a AMF Angle pearl..or one of the Brunswick Groove or Columbia Scout reactives..can you give me any help? Really appreciate it, thanks. Bill

Answer: Bill,

A urethane ball will get you some hit, problem is the ball weight. When you get as light as you've gotten, the ball weight doesn't help much.

Consider a conventional grip instead of finger tip (you might be able to handle more weight). With dry lanes you obviously don't need as much rotation, besides, early rotation is what causes balls to hook early and hit weak.

Length of the grip helps you control the ball, shortening the grip demands more grip pressure and will put more strain on your hand (bad idea). Also, causes slower ball speed from what you are saying. 

The grip change (to conventional) will help alleviate the finger tip arthritis discomfort. You will get less rotation but be able to play straighter but with more angle at the pocket.

When you get light (under 14lbs), you get very little help from the core. The core for a lighter ball often is very different from the heavier weight blocks. Under 12lbs, often is only a pancake weight-block (same as in a basic plastic ball). So "stronger" balls aren't stronger inside in lighter weights.

Thanks for the questions. Good luck.

Questions? Contact me at revbowl@gmail.com. 

Which Bowling Ball Is For Me?

Name: Vikki

Question: Which bowling ball is for me?

I am a female bowler and currently have a 14 to 15 yr old Brunswick 300, 10 lb ball (no other info on the ball).  When I purchased it years ago, I only bowled for fun and was a palm-up, straight down the center of the lane bowler.  I recently had it re-drilled to better fit my hand and began serious efforts to bowl properly.  I line up on the center dot, aim for the second arrow and have a hand shake position release.  The ball goes straight down the lane and begins a slow hook to the 1-3 pocket.  I have finally gotten some consistency with hitting the pocket.  I feel the ball is too light because it seems I have to crank to get any power/speed which causes me to be inconsistent.  I rarely achieve a strike even when I'm not trying for more speed.  My current average is 115.  My house lanes are usually dry to medium oil.  I know nothing about the ball I have now, nor do I know my speed or revs.  Should I increase to a 12 lb ball, or a 14?  Is there a specific bowling ball made now that will mimic my Brunswick's performance?  Any advice is greatly appreciated!

Answer: Vikki,

My guess would be your ball is polyester (plastic) or rubber. The driller who plugged it should be able to verify.

Your ball weight is dictated by your desire to knock down pins. With a well fit bowling ball, the ball lets go of you, so grip pressure is eliminated (thus the strain of gripping). I start bowlers at 10 percent of their body weight up to the maximum of 16 pounds.

Balls, from a bowling store come in one pound increments past 10, usually 6,8,10,11,12,13,14,15,16. Occasionally a brand will include 9 pounds options.

Increase your weight to what you feel most comfortable with, but increase it. Small steps to start! Do not jump up more than 2 pounds at a time and check the fit with each change. You did not mention what kind of fit you have. I'd stay with whatever you are used to now. 

If it is conventional, with fingers in the ball to the second knuckle and thumb inserted to the base of the thumb, you will use the weight and natural feel and swing to improve your scores. The ball should literally hang from your hand with no need for grip pressure. Work less hard as you up the weight. Let momentum and gravity do ALL the work. Once you feel like you have achieved the heaviest weight you would like to use, talk to your Pro Shop/Ball Driller about the benefits of a finger tip grip. 

Throwing a performance ball will be helpful, the urethane base cover (in urethane, reactive resin urethane, and everything in between) will help your hitting power and the surface and core could help your hook potential.

Your Brunswick ball is most likely a three piece, pancake weight-block. The 
Brunswick plastic spare balls, the Zones, would have slightly stronger cores vs your current ball. Bumping up to the affordable Twist series or Rhino series will offer more cover (traction) and stronger core (engine). The Columbia White Dot and Ebonite Maxims have the same construction as the Brunswick Zone and are the same smooth polyester cover (spare ball).  The Storm Mix series mimics the core of your ball but is made of urethane.


Urethane options and other entry level reactive resin urethane balls could offer more performance than you have, but hook is generated by the bowler. The ball augments the bowler with a tool that is more potentially hookable. 

Thanks for the questions. Good luck.

Questions? contact me at: revbowl@gmail.com

How Do I Throw a Hook

Name: Samantha

Subject: throwing a hook

QUESTIONHi,

I have been bowling since I was 8 years old, I have never been much more than a 120 average bowler. My husband has always called me a backup bowler. I am right handed, I used to stand on the left side and aim for the 4th dot in order to hit the pocket. My ball always would curve to the right. So, enough history, earlier this year I have been trying desperately to learn how to throw a hook. I have a Storm ball (I'm not sure at the moment which one exactly but I've been told it is a good ball.) I've been trying since April and my ball would always spin like a top. My husband tells me it's my release. Now he has me throwing the ball as though I was a straight ball bowler and the ball does just that..it goes straight. I am at my wits end. My husband says that when I release it that my hand is like a claw but pointing upward. I have a 4 step approach, I can never figure out how much to bend down without my husband telling me that I'm dropping my shoulder. Please help me, any advice would be appreciated!!

ANSWER: It sounds like you may have a grip issue. When undo grip pressure is necessary to hold onto a ball, the elbow sometimes comes into play with female bowlers. When tightening muscles in your arm, to help hold onto the ball, your elbow could be tucking in, causing your wrist and hand to rotate left to right. The result, you deliver the ball straight or even rolling the ball left to right (a backup hook).

If you can position the ball in front of your armpit with the thumb at 10 o'clock. Try to swing the ball, straight back and straight forward. Keep the hand position throughout the approach, swing, and delivery. As you roll the ball, continue the hand forward (toward your target)and up, like throwing an imaginary glass of water up and over your right shoulder. Maintaining the hand position will provide the axis tilt you want.

Most bowlers try to turn the ball to much and take much of the needed energy away with too much rotation, overturning the shot. Throw with this hand position for awhile, you need to break down your current muscle memory and create a new and different feel as you bowl.

You will also want to incorporate less bend at the waist and more bend of the knees. Start with an athletic stance, with bent knees helping absorb some of the bounce and wobble, as you take your 4 step approach. A slight bend at the waist, for balance, will help. As you move forward keep the shoulders up, maintain the position of your back, like in the stance, for leverage. Work on your stance, approach and straight swing before you concentrate on the hand position and learning to hook the ball. Your ability to duplicate the stance, approach and swing will help greatly when learning to control a hook delivery.

Working on one change at a time, and throwing at least 30-50 shots, will help breakdown current muscle memory, and allow you to learn the new elements of your game.

---------- FOLLOW-UP ----------

QUESTION: I first just wanted to say "thank you for your time and advice." I now have realized what the problem is and you were right on about me gripping the ball. I just bought a new ball a "Hammer Anger." I am struggling with the fact of not holding on to it for dear life because I'm afraid it will fall out of my hand on the back swing. I have also realized now that instead of releasing the ball when I come down that I have been releasing it out in front of me, "airborne" if you can get the picture. I am so frustrated right now and for all of you guys out there reading this I'm sure you'll get a good laugh but I cried. I am so very, very, frustrated and I so desperately want to be a really great bowler. When I was a backup bowler I could bowl 140's, 150's, I have probably bowled 3 200 games my entire life. I really, really, want to master this sport. It is such a blow to my pride to watch the "98" pin bowler that we bowl against (who I used to dance circles around) beat my measly 89, 90, 105 games. I am hoping that with alot of practice that I can somehow turn things around and get "back in the game." My thumb has not been coming out first so now that and my release point are the 2 things I am trying to master at the moment. I try so very, very, hard, I know why I grip the ball for fear that on the backswing it will fall out of my hand.

Answer: Without seeing you play, I can't know what is holding you back, or frustrating your efforts. But, remember you are adjusting muscle memory, altering your approach and changing the speed (possibly) and rotation of your shots. It will NOT come quickly.

Work on ONE thing at a time. Please be patient. The game is played on a little more than a 40inch wide playing field. You need to begin to feel yourself duplicating what you do. Consistency is your first objective. So, minimal grip pressure is a huge benefit.

Your ball is probably to strong for what you want to do. A strong cover like the Anger needs oil. Do you throw very hard? With a stronger ball you run into the possibility that you need to overcome your ball reaction, bad idea. Keep in mind that the lane you practice on may be very different then the lanes you bowl league on, too.

Give yourself little successes for Christmas, they will add up to a more consistent game. A world class runner started out with baby steps. Good bowling.

Questions? contact me at: revbowl@gmail.com

Monday, June 27, 2022

NEW PRODUCTS FROM STORM, ROTO GRIP AND 900 GLOBAL

 


NIGHT ROAD
Thunder Line  Street Date - 8/30/22   Release Date - 9/2/22

The Storm Bolt doesn’t just identify a Storm bowling ball. It represents over three decades of tradition, a commitment to quality, and a promise to always roll better than ever before. The covers are robust. The cores are exact. Because when the scores add up, the thrill of sending all ten back tells you that it’s worth it.

Fragrance: Fruit Trifle

Color: Midnight Black/Silver








RST X-3™

HP4  Street Date - 8/16/22  Release Date - 8/19/22

Formulated for ALL bowlers regardless of their style or their skill level. The latest installment in the RST Series provides WAY more mid-lane motion than the RST X-2, while still providing PLENTY of giddy up down lane. This version of MicroTrax™ Hybrid features nano particles throughout to provide the traction you need in oil, while its two parts pearl provide you the reaction you have come to know and love about the RST Series. So, whether you are a recent PBA Hall of Famer, or this is your very first high-end ball, the RST X-3 will provide unparalleled reaction time and time again.

Color: Yellow/ Smoke/ Grape

HYPED™ SOLID

HP2  Street Date - 8/16/22  Release Date - 8/19/22

Following the footsteps of the versions before it, the HYPED SOLID is here to compliment the HP2 Line of balls. Its VTC™ (Versatile Traction Control) Solid coverstock will provide earlier traction on the lane than previous versions making it ideal for just a little more oil, or, making it the perfect ball when the friction down lane seems unmanageable and you need more overall control. This ball definitely takes VERSATILITY to the MAX! So if you weren’t already excited, now is the time you should get HYPED!

Engineered For – Medium Oil conditions

Color: Wine/Berry/Magenta

HUSTLE™ USA

HP1  Street Date - 8/16/22  Release Date - 8/19/22

Looking for your first “hook ball”? – The Hustle Line has you covered… Needing a ball for those Light to Medium oil patterns in your arsenal? – The Hustle Line has you covered… On a budget? - The Hustle Line has your covered... This ENTIRE series of balls outperforms any other options in this price point on the market today. It’s OK, you can thank us later.

Engineered For – Light to Medium Oil Conditions

Color: Ultra Red/Snow/Azure (USA)


REALITY CHECK™

900 Series  Street Date - 7/26/22  Release Date - 7/29/22

The ALL NEW S84 Beta Hybrid Cover was designed to complement the S84 Response Cover. This revolutionary material reduces the microscopic pore sizes while maintaining the “teeth” that its predecessor became famous for. S84 Beta offers a similar overall hook potential versus S84 Response, but a vastly different backend shape. Paired with the Disturbance Asymmetric Core, the Reality Check will offer the most angular reaction ever for the 900 Series!!

Color: Black/Indigo/Maroon





WOLVERINE™ DARK MOSS

700 Series  Street Date - 7/26/22  Release Date - 7/29/22

Just when you thought it was safe to go back into the woods...the Wolverine™ Dark Moss attacks!! Featuring the incredibly versatile S70™ Pearl Cover with an all new finish, this animal will handle more oil than its predecessor while not sacrificing any backend. The Lacerate 2.0™ Core is the premier weight block within the Global line for moving in and opening your angles. Max backend never looked so good.

Color: Dark Moss Pearl






Tuesday, May 17, 2022

SUMMER OF PBA TOUR ACTION


PBA Tour competition continues throughout the summer, highlighted by four PBA Super Regionals that will give top national and regional PBA Tour players a chance to compete for a guaranteed $10,000 minimum first-place check in each of the events. The PBA added $32,000 to be dispersed among the prize funds and each Super Regional will be worth double points toward qualification for the season-ending Regional Players Invitational.

Fans will be able to watch the stepladder finals of each Super Regional live on the PBA Facebook page.

Beginning with the Lubbock Sports Open in Lubbock, Texas July 22-24, the Super Regionals will be held in multiple markets across the United States: the PBA Jonesboro Open in Jonesboro, Ark. August 5-7, PBA Bowlerstore.com Central Classic presented by Moxy’s Xtra Pair in Coldwater, Ohio August 12-14 and the PBA Booster Club of Hampton Roads Open in Chesapeake, Va. August 19-21.

Between the first and second Super Regional events, a PBA Tour national title is up for grabs in the Storm PBA/PWBA Striking Against Breast Cancer Mixed Doubles, being held in Houston July 28-31 and live-streamed on BowlTV. The SABCMD has awarded a PBA and PWBA Tour title since 2015 and will feature defending champions EJ Tackett and Danielle McEwan.

Additionally, players will have an opportunity to compete in two PBA Regional events surrounding the Super Regional Summer Tour, August 9-11 in Minister, Ohio and August 16-18 in Hampton, Va.

All PBA Super Regionals and PBA Regional events count toward the 2022 PBA Regional points standings, with the top players at the end of the season advancing to the 2022 PBA Regional Players Invitational. Fans can follow all the PBA action this summer on pba.com and @PBATour’s social media handles across Twitter, Facebook, Instagram, and YouTube.

PBA ACTION THIS SUMMER

PBA Lubbock Sports Open, Lubbock, Texas – July 22-24
Storm PBA/PWBA Striking Against Breast Cancer Mixed Doubles, Houston – July 28-31
PBA Jonesboro Open, Jonesboro, Ark. – August 5-7

PBA Ernst Apparel Central Classic, Minister, Ohio – August 9-11
PBA Bowlerstore.com presented by Moxy's Xtra Pair, Coldwater, Ohio – August 12-14
PBA Clean Air Solutions LLC Biz Hampton Open, Hampton, Va. – August 16-18
PBA Booster Club of Hampton Roads Open, Chesapeake, Va. – August 19-21

View the complete PBA Regional Tour schedule here

MAY 17, 2022 -  JEF GOODGER